Go Fuzzing

Go supports fuzzing in its standard toolchain beginning in Go 1.18. Native Go fuzz tests are supported by OSS-Fuzz.

Try out the tutorial for fuzzing with Go.

Overview

Fuzzing is a type of automated testing which continuously manipulates inputs to a program to find bugs. Go fuzzing uses coverage guidance to intelligently walk through the code being fuzzed to find and report failures to the user. Since it can reach edge cases which humans often miss, fuzz testing can be particularly valuable for finding security exploits and vulnerabilities.

Below is an example of a fuzz test, highlighting its main components.

Example code showing the overall fuzz test, with a fuzz target within
it. Before the fuzz target is a corpus addition with f.Add, and the parameters
of the fuzz target are highlighted as the fuzzing arguments.

Writing fuzz tests

Requirements

Below are rules that fuzz tests must follow.

Suggestions

Below are suggestions that will help you get the most out of fuzzing.

Running fuzz tests

There are two modes of running your fuzz test: as a unit test (default go test), or with fuzzing (go test -fuzz=FuzzTestName).

Fuzz tests are run much like a unit test by default. Each seed corpus entry will be tested against the fuzz target, reporting any failures before exiting.

To enable fuzzing, run go test with the -fuzz flag, providing a regex matching a single fuzz test. By default, all other tests in that package will run before fuzzing begins. This is to ensure that fuzzing won’t report any issues that would already be caught by an existing test.

Note that it is up to you to decide how long to run fuzzing. It is very possible that an execution of fuzzing could run indefinitely if it doesn’t find any errors. There will be support to run these fuzz tests continuously using tools like OSS-Fuzz in the future, see Issue #50192.

Note: Fuzzing should be run on a platform that supports coverage instrumentation (currently AMD64 and ARM64) so that the corpus can meaningfully grow as it runs, and more code can be covered while fuzzing.

Command line output

While fuzzing is in progress, the fuzzing engine generates new inputs and runs them against the provided fuzz target. By default, it continues to run until a failing input is found, or the user cancels the process (e.g. with Ctrl^C).

The output will look something like this:

~ go test -fuzz FuzzFoo
fuzz: elapsed: 0s, gathering baseline coverage: 0/192 completed
fuzz: elapsed: 0s, gathering baseline coverage: 192/192 completed, now fuzzing with 8 workers
fuzz: elapsed: 3s, execs: 325017 (108336/sec), new interesting: 11 (total: 202)
fuzz: elapsed: 6s, execs: 680218 (118402/sec), new interesting: 12 (total: 203)
fuzz: elapsed: 9s, execs: 1039901 (119895/sec), new interesting: 19 (total: 210)
fuzz: elapsed: 12s, execs: 1386684 (115594/sec), new interesting: 21 (total: 212)
PASS
ok      foo 12.692s

The first lines indicate that the “baseline coverage” is gathered before fuzzing begins.

To gather baseline coverage, the fuzzing engine executes both the seed corpus and the generated corpus, to ensure that no errors occurred and to understand the code coverage the existing corpus already provides.

The lines following provide insight into the active fuzzing execution:

For an input to be “interesting”, it must expand the code coverage beyond what the existing generated corpus can reach. It’s typical for the number of new interesting inputs to grow quickly at the start and eventually slow down, with occasional bursts as new branches are discovered.

You should expect to see the “new interesting” number taper off over time as the inputs in the corpus begin to cover more lines of the code, with occasional bursts if the fuzzing engine finds a new code path.

Failing input

A failure may occur while fuzzing for several reasons:

If an error occurs, the fuzzing engine will attempt to minimize the input to the smallest possible and most human readable value which will still produce an error. To configure this, see the custom settings section.

Once minimization is complete, the error message will be logged, and the output will end with something like this:

    Failing input written to testdata/fuzz/FuzzFoo/a878c3134fe0404d44eb1e662e5d8d4a24beb05c3d68354903670ff65513ff49
    To re-run:
    go test -run=FuzzFoo/a878c3134fe0404d44eb1e662e5d8d4a24beb05c3d68354903670ff65513ff49
FAIL
exit status 1
FAIL    foo 0.839s

The fuzzing engine wrote this failing input to the seed corpus for that fuzz test, and it will now be run by default with go test, serving as a regression test once the bug has been fixed.

The next step for you will be to diagnose the problem, fix the bug, verify the fix by re-running go test, and submit the patch with the new testdata file acting as your regression test.

Custom settings

The default go command settings should work for most use cases of fuzzing. So typically, an execution of fuzzing on the command line should look like this:

$ go test -fuzz={FuzzTestName}

However, the go command does provide a few settings when running fuzzing. These are documented in the cmd/go package docs.

To highlight a few:

Corpus file format

Corpus files are encoded in a special format. This is the same format for both the seed corpus, and the generated corpus.

Below is an example of a corpus file:

go test fuzz v1
[]byte("hello\\xbd\\xb2=\\xbc ⌘")
int64(572293)

The first line is used to inform the fuzzing engine of the file’s encoding version. Although no future versions of the encoding format are currently planned, the design must support this possibility.

Each of the lines following are the values that make up the corpus entry, and can be copied directly into Go code if desired.

In the example above, we have a []byte followed by an int64. These types must match the fuzzing arguments exactly, in that order. A fuzz target for these types would look like this:

f.Fuzz(func(*testing.T, []byte, int64) {})

The easiest way to specify your own seed corpus values is to use the (*testing.F).Add method. In the example above, that would look like this:

f.Add([]byte("hello\\xbd\\xb2=\\xbc ⌘"), int64(572293))

However, you may have large binary files that you’d prefer not to copy as code into your test, and instead remain as individual seed corpus entries in the testdata/fuzz/{FuzzTestName} directory. The file2fuzz tool at golang.org/x/tools/cmd/file2fuzz can be used to convert these binary files to corpus files encoded for []byte.

To use this tool:

$ go install golang.org/x/tools/cmd/file2fuzz@latest
$ file2fuzz

Resources

Glossary

corpus entry: An input in the corpus which can be used while fuzzing. This can be a specially-formatted file, or a call to (*testing.F).Add.

coverage guidance: A method of fuzzing which uses expansions in code coverage to determine which corpus entries are worth keeping for future use.

failing input: A failing input is a corpus entry that will cause an error or panic when run against the fuzz target.

fuzz target: The function of the fuzz test which is executed for corpus entries and generated values while fuzzing. It is provided to the fuzz test by passing the function to (*testing.F).Fuzz.

fuzz test: A function in a test file of the form func FuzzXxx(*testing.F) which can be used for fuzzing.

fuzzing: A type of automated testing which continuously manipulates inputs to a program to find issues such as bugs or vulnerabilities to which the code may be susceptible.

fuzzing arguments: The types which will be passed to the fuzz target, and mutated by the mutator.

fuzzing engine: A tool that manages fuzzing, including maintaining the corpus, invoking the mutator, identifying new coverage, and reporting failures.

generated corpus: A corpus which is maintained by the fuzzing engine over time while fuzzing to keep track of progress. It is stored in $GOCACHE/fuzz. These entries are only used while fuzzing.

mutator: A tool used while fuzzing which randomly manipulates corpus entries before passing them to a fuzz target.

package: A collection of source files in the same directory that are compiled together. See the Packages section in the Go Language Specification.

seed corpus: A user-provided corpus for a fuzz test which can be used to guide the fuzzing engine. It is composed of the corpus entries provided by f.Add calls within the fuzz test, and the files in the testdata/fuzz/{FuzzTestName} directory within the package. These entries are run by default with go test, whether fuzzing or not.

test file: A file of the format xxx_test.go that may contain tests, benchmarks, examples and fuzz tests.

vulnerability: A security-sensitive weakness in code which can be exploited by an attacker.

Feedback

If you experience any problems or have an idea for a feature, please file an issue.

For discussion and general feedback about the feature, you can also participate in the #fuzzing channel in Gophers Slack.